ITV Flow Calculator

Use the below calculations to determine Cv when hot effluent flow rate is known:

1. Determine the required cold water flow (CW) needed to temper the hot effluent.

HOT EFFLUENT FLOW RATE (HF) GPM
HOT EFFLUENT TEMPERATURE (HT) °F
MAX. ALLOWABLE DRAIN TEMPERATURE (MT) °F
MAX. COLD WATER TEMPERATURE (CT) °F
CW GPM

2. Calculate Cv required to flow that much cold water.

COLD WATER PRESSURE (CP) PSIG
Cv

Refer to the ITV Cv chart below to determine the correct size ITV to use.

ITV WATER INLET SIZE (NPT) Cv
3/4″ 2.0
1″ 4.0
If hot effluent flow rate is unknown, but the cold water pressure is known then use the below calculation to determine the maximum achievable effluent flow rate for the 3/4″, & 1″ ITV.

1. Determine the cold water flow rate.

ITV WATER INLET SIZE 3/4″ NPT ITV WATER INLET SIZE 1″ NPT
Cv 2.0 Cv 4.0
CP PSIG CP PSIG
Effluent PSIG Effluent PSIG
CW GPM CW GPM

2. Determine the maximum effluent flow achievable.

ITV WATER INLET SIZE 3/4″ NPT ITV WATER INLET SIZE 1″ NPT
MT °F MT °F
CT °F CT °F
HT °F HT °F
HF GPM HF GPM

 

ThermOmegaTech® is not responsible for inaccurate inputs into the calculator resulting in the wrong ITV size being purchased. Standard Terms and Conditions will apply to any and all orders placed. If you have questions on size selection for your application, consult your local representative or contact our factory.